How to Cut Tree Limbs That Are Too High to Reach

The trees in the yard need regular pruning to grow healthy. Some homeowners choose to hire a tree service company to cut branches. Another part of the homeowner likes to use the tool to cut the branches, but in the implementation will find that it is not easy to remove the branches that are too high. This article will highlight some tips on how to safely cut tree limbs that are too high to reach.

When to cut high tree limbs

The cutting time is related to the healthy growth of trees. Tree experts suggest that the best time to cut branches at high altitude is winter. At this time the trees are in a dormant period.

The leaves have fallen in winter, and you can clearly see the internal structure of the tree, which will help cut branches that are too high. Work efficiency and safety will be greatly improved.

Cutting trees in winter also reduces the risk of tree disease.

When you see the branches die, break, or pose a potential threat to people and houses, no matter what season, they must be removed in time.

You may like: When is the Best Time of a Year to Prune Trees

how to cut tree limbs that are too high to reach

1. Place the ladder in the right place

The placement of the ladder directly affects the safety of the cutting work. Extend the ladder to a suitable height and lean it against the tree trunk, and tie the ladder to the point where the ladder contacts the tree. This will make you safer.

If you are using a step ladder, please stay as close to the tree trunk as possible while keeping the ground level.

In order to further enhance safety, it is best to have another person holding the ladder on the ground when cutting branches at high altitudes.

2. Remove Small Branches

Use pole saw, pole pruner or rope saw to cut the branches on the surface and bottom of the tree, and gradually remove the fine branches on the branches, which will facilitate the cutting of the branches at high places.

It is strongly recommended that you use a pole pruner to remove these branches. Just pull the trigger to easily cut the small branches at any position.

Another convenient tool for cutting small branches is a wire saw. You only need to use a wire saw to wrap around the small branches, and then pull back and forth on the branches until the branches are cut.

Please cut about 4-6 inches from the branch connection. Doing so will help the tree heal the wound and prevent the branches from getting sick and necrotic.

3. Remove high branches

After the small branches on the branch are cut, it will help you cut the larger branches at high heights, and continue to use pole pruner or chain saw for cutting. The cut is about 4-6 inches from the trunk to protect the tree from any damage.

Adjust your position, and don’t cut the big branches down for cutting. The fallen branches may fall on your body or ladder.

Repeat the above operation until the high branch is cleared.

Do not cut more than 1/3 of the branches or the crown, as this will damage the growth of the tree.

Common problem

How to trim trees near buildings or power lines

If the branch to be cut is above the building or the power cord, you must not try to cut it yourself. You need to hire a professional to trim the tree.

What safety measures should be taken before pruning trees

Before climbing, you also need to check whether the branches are fragile or broken. Fragile and broken branches can’t support your weight. Avoid these branches as much as possible.

For greater safety, you can add a rope to tie the ladder to the tree.

When climbing ladders, especially when climbing with tools, be sure to maintain balance and ensure that someone is supporting the ladder underneath.

Branches in high places fall and hit other limbs, they may deviate from where they were originally dropped, so before cutting, make sure there are no people or pets around the tree.

What safety equipment is needed to trim trees

How to safely cut tree limbs that are too high to reach? Before the homeowner’s cutting work, please prepare the following equipment and protective equipment:

Use pole saw, pole pruner, pocket saw as cutting tools. These tools will help cut branches at high altitudes.

Prepare equipment such as telescopic ladders, safety helmets, goggles, ear plugs, overalls, gloves and non-slip shoes. In high-altitude operations, protective equipment such as helmets or hard hats and gloves can protect yourself from injury. Goggles can prevent sawdust, flying insects, and dust from entering your eyes. Earplugs can reduce cutting noise.

Final thoughts

We have learned how to safely cut tree limbs that are too high to reach. Although pruning the trees yourself can save you money, for the safety of yourself and your family, it is recommended that you hire a professional to cut tree branches that are too high. After all, professional tree companies have professional equipment and technology.